Before you use this product for the first time, please take a few moments to read these instructions and keep it for reference.
1. To protect against risk of electrical shock, do not put the device in water or other liquid. This may cause damage to the product.
2. To protect against fire, do not operate the unit in the presence of explosive and/or flammable fumes.
3. Do not use the unit for other than intended used.
4. This product is intended for normal domestic household use only.
5. Keep the unit away from children
DESCRIPTION
Rechargeable Milk Frother
Model: MFB1501D
Materials:Stainless Steel and ABS

OPERATING
1. Dormant state: the product is in the lowest power consumption mode.
2. Working state: the first press button, the motor starts at low speed, the second press button, the motor switches high speed, the third press button, the motor stops, the product enters the dormancy state.
3. Charging status: the product is charged with conventional microUSB power cord, the indicator light in charging shows red, the indicator light after charging shows green, during the plug-in charger, the key is invalid and the product cannot work. Unplug the charger and the product returns to dormancy.
4. INSTALL THE WHISK:
Insert the whisk down into the motor head in the direction of the arrow and make sure all of it is inserted into the bayonet.
Small arrow
Whisk
* Tips:
When installing the whisk align the small arrow on the motor head is must.

5. INSTALL AND REMOVE SLEEVE:
Align sleeve opening with main body and turn main body clockwise until you hear a click, indicating sleeve and main body are in place. To remove, hold the sleeve and rotate the main body counterclockwise.
一
ELECTRICAL FUNCTION ILLUSTRATION
1. Power supply: single-section 3.7V, Model 14500,
800mAh lithium battery
1. Charging: USB charging
2. Charging time: about 1.5 hours
SUPPLEMENTARY NOTE
The one-time working time of this product is 3 minutes, it will stop working automatically after 3 minutes,please restart it if next working is needed It is recommended to downtime for a while when cycle operation,otherwise it will shorten the service life of the machine due to excessive use times.